Dodge Ram Power Wagon Provozní pokyny stáhnout pdf (Strana 221)

100

101

The switch has three positions, UNLOCK, RR, and FR/

RR. Under normal driving conditions the switch should

be left in the UNLOCK position. In the UNLOCK posi-

tion, the front and rear axles are unlocked. In the RR

position, the rear axle is locked. In the FR/RR position,

the front and rear axles are locked.

NOTE: Even when the axles are in the UNLOCK

position, the limited slip differential in the rear axle still

provides torque biasing capability for moderate low

traction environments.

During the command to lock the axle, the indicator light

will flash until the axle is locked. After the lock command

has been successfully executed, the light will remain on

solid.

To lock the rear axle, place the vehicle in 4LO by

following the procedure in Four Wheel Drive Operation,

located in this section of the manual. Move the axle

locker switch position to RR while traveling less than 3

MPH (5 KM/H). The RR indicator light will remain on

when the rear axle is locked.

Rotary Locking Axle Switch

STARTING AND OPERATING 221

1 2 ... 216 217 218 219 220 221 222 223 224 225 226 ... 454 455

Komentáře k této Příručce

Žádné komentáře

Dodge Ram Power Wagon Provozní pokyny Strana 221

Komentáře k této Příručce

Související produkty a manuály pro Auta Dodge Ram Power Wagon