Dodge Ram Power Wagon Provozní pokyny stáhnout pdf (Strana 270)

100

101

For additional assistance, the winched vehicle can be

slowly driven while being pulled by the winch. Continue

pulling until the vehicle is on stable ground. If you are

able to drive the vehicle, the winching operation is

complete.

NOTE: Avoid overheating the winch motor. For ex-

tended winching, stop at reasonable intervals to allow

the winch motor to cool down.

NOTE: What to look for under load: The wire rope

must always spool onto the drum as indicated by the

drum rotation decal on the winch. As you power-in,

make sure the wire rope winds evenly and tightly on the

drum. This prevents the outer wire wraps from drawing

into the inner wraps, binding and damaging the wire

rope. Avoid shock loads by using the control switch

intermittently to take up wire rope slack. Shock loads can

momentarily far exceed the winch and wire rope ratings.

During side pulls the wire rope tends to stack up at one

end of the drum. This stack can become large enough to

cause serious damage to the winch. So, line up pulls as

straight ahead as possible and stop winching if the wire

rope comes close to the tie rods or mounting plate. To fix

Using The Remote Control

270 STARTING AND OPERATING

1 2 ... 265 266 267 268 269 270 271 272 273 274 275 ... 466 467

Komentáře k této Příručce

Žádné komentáře

Dodge Ram Power Wagon Provozní pokyny Strana 270

Komentáře k této Příručce

Související produkty a manuály pro Auta Dodge Ram Power Wagon