Dodge Ram Power Wagon Provozní pokyny stáhnout pdf (Strana 352)

100

101

1. Remove the spare wheel, jack, and tools from storage.

2. Using the wheel wrench, loosen, but do not remove,

the wheel nuts by turning them counterclockwise one

turn while the wheel is still on the ground.

3. For Power Wagon, when changing the front wheel,

assemble the jack drive tube to the jack and connect the

drive tube to the extension tube. Place the jack under the

axle as close to the tire as possible with the drive tubes

extending to the front. Connect the jack tube extension

and wheel wrench.

When changing a rear wheel, assemble the jack drive

tube to the jack and connect the drive tube to the

extension tube. Place the jack under the axle between the

spring and the shock absorber with the drive tubes

extending to the rear. Connect the jack tube extension and

wheel wrench.

Before raising the wheel off the ground, make sure that

the jack will not damage surrounding truck parts and

adjust the jack position as required.

NOTE: If the jack will not lower by turning the dial

(thumb wheel) by hand, it may be necessary to use the

jack drive tube in order to lower the jack.

352 WHAT TO DO IN EMERGENCIES

1 2 ... 347 348 349 350 351 352 353 354 355 356 357 ... 466 467

Komentáře k této Příručce

Žádné komentáře

Dodge Ram Power Wagon Provozní pokyny Strana 352

Komentáře k této Příručce

Související produkty a manuály pro Auta Dodge Ram Power Wagon